Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How can you turn off the flashing red caution LED on the ATV630 and ATV930 process drives?

    How can you turn off the flashing red caution LED on the ATV630 and ATV930 process drives?

    Product Line:
    Altivar ATV630 and ATV930


    There is a default alarm set in the warnings group for Analog input AI1, AI2, and AI3 that has to be turned off. 

    The warning LED is triggered when a Warning Group item is activated.  The factory default has many items selected for monitoring under Warning Group 1.  A typical warning is caused when an analog input is configured for 4-20mA, but the signal is not present.

    From the Main menu:
    1. Scroll to Complete Settings and press OK
    2. Select Error Warning Handling and press OK
    3. Select Warnings Group Configuration and press OK
    4. Select Warn group 1 definition and press OK
    5. Now (almost halfway down the list) uncheck "AI1 4-20 Warning", "AI2 4-20 Warning", and "AI3 4- 20 Warning" boxes.

    Now the red flashing warning light will turn off. 

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance