Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Why is the inverter making negative power on a PV 100\225 inverter?

    The inverter has no faults and the inverter seems to be running, but it is making negative power.

    Product Line:
    PV100\225, PV100S\225S


    DC contactor not closing

    When you start up the inverter, listen and see if the DC contactor closes or not. The DC contactor is located on the right hand side of the main inverter cabinet. These legacy systems do not have a feedback to monitor the closure of the AC or DC contactor. It send a command for the contactor to close, but if the contactor does not close. The system simply assumes that it closed. In this case, the AC contactor closes and the system is using AC power instead of making power from the array. Call 866-519-1470 and select option 3 and 3 to confirm and to open a case.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance