Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: Data Center Expert | How do I create and manage thresholds?

    Issue:
    Process for creating and managing thresholds in StruxureWare Data Center Expert.

    Product Line:
    StruxureWare Data Center Expert (DCE)
    StruxureWare Central (SWC)
    InfraStruXure Central (ISXC) 

    Environment:
    StruxureWare Data Center Expert (all versions)
    StruxureWare Central (all versions)
    InfraStruXure Central (all versions) 

    Cause:
    Custom thresholds need to be created for most third-party devices that are added into DCE.  APC devices have device alerts by default, but can still have additional thresholds created for them within DCE.

    Resolution:

    Creating Custom Thresholds
    Editing or Deleting Custom Thresholds
     

     
    Creating a Custom Threshold

    1) Open the DCE client and go to the Monitoring perspective.

    2) Within the Device Groups pane, select a group that has the device you would like to create a custom threshold for.

    3) Within the Device View pane, right-click on a device and select View Device Sensors.  The sensors that are listed are what a custom threshold can be created on.  Select OK when finished.

    4) Right-click on the device and select Create Thresholds.  Select the type of sensor that you wish to create a custom threshold for.

    5) Select the threshold type you wish to define.

    6) Check the box for the sensors of this type you wish to create thresholds for.

    7) Provide a descriptive name to the threshold and define its values.  Select next when finished.

    8) Select the Notification Policies that this threshold should be added to for alarm notifications.
    NOTE: You can add custom defined thresholds to more than one Notification Policy.
     
    Editing or Deleting a Custom Threshold

    1) Open the DCE client and go to the Alarm Configuration perspective.

    2) Select the device within the Device Groups pane.

    3) In the Threshold Alarm Configurations pane will be a list of the custom thresholds for this device.  Expand down the threshold tree and right-click on the threshold you wish to edit or delete and select the corresponding action.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance