Discover our Clipsal Smart Home packages as seen on the Block

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Does COM'X 510 support RSTP?

    Product Line
    COM'X 5xx

    Protocol support 


    No, The COM'X 510 does not support RSTP.

    The Rapid Spanning Tree Protocol (RSTP) IEEE 802.1W standard is available to address the Spanning Tree Protocol (STP) convergence time gap issue. Rapid Spanning Tree Protocol (RSTP) enables STP Root Ports and STP Designated Ports to change from the blocking to forwarding port state in a few seconds.

    COM'X 510 only uses a single static default gateway for routing traffic It does have a Switch mode or a dual mode.
    Switch mode - in which the eth1 eth2 ports work as a standard network switch and the COM'X has one IP
    Dual mode - in which the ethernet 1 and ethernet 2 ports work as separate networks and the COM'X has two IP


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance