in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Why are the IP Address, Mask and/or Gateway not saved when using Ethernet IP on ATV630 drive after a power cycle?

    Issue:
    Why are the IP Address, Mask and/or Gateway not saved when using Ethernet IP on ATV630 drive after a power cycle?

    Product Line:
    ATV630 drives
     
    Environment:
    Ethernet IP
     
    Cause:
    The Mode "Fixed" was not selected when up the IP.
     
    Resolution:

    To avoid the loss of the values IP Address, Mask and/or Gateway when the device is power cycled the IP Mode must be set to "Fixed"
     
    SETTINGS CODE VALUE DESCRIPTION
    [FIXED] MAnU 0 Manually set the IP address.
    [BOOTP] bOOt 1 Automatically gets the IP address from the Bootp or DHCP server using the Bootp or DHCP server using the MAC address.
    [DHCP] dHCP 2 Automatically gets the IP address from the Bootp or DHCP server using the Factory setting: DHCP

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance