Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is the C-Bus B/W MKII Touch Screen Gyprock Bracket part number?

    No. The Touch Screen comes with an Installation Template, it is used for stud/plasterboard wall installation.

    Mounting in Stud Walls To mount the C-Bus Black & White Mk II in a stud/plasterboard wall:
         1) Cut an appropriately sized hole using the provided template. Ensure you leave sufficient clearance from studs and other obstructions.
         2) Remove the green Phoenix connector and wire to C-Bus.
         3) Hold the touch screen up to the wall and plug the connectors into the unit (C-Bus and RS-232 if used).
         4) Place the touch screen in the wall.
         5) Tighten the four mounting screws to rotate and tighten the mounting flaps.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance