Discover our Clipsal Smart Home packages as seen on the Block

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Can I use an EGX150 to connect a CM2000 series as a downstream device?

    EGX150 used as a master device that is connected to downstream devices such as a CM2000

    Product Line
    EGX150 (Link150), CM2000 Series

    Communications, Wiring, Gateway Supported device type

    The EGX150 does have the capability of having a CM2000 series as a downstream device. The protocol on the EGX150 must be set to PowerLogic (SY/MAX) in order for a connection to be established. CM2000 series meters are not designed to do 2 wire RS-485 communication. CM2000 series meters can only be wired as 4 wire RS-485 communication. If you would like to use 2 wire communication, a CNV-100 is required to convert from 2 wire to 4 wire. For more information on CNV-100, click on the following article: FA203955

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance