in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Is there an Iconic sensor mech available?

    Yes there is a new sensor mech 
    NZ PDL cat number is PDL352MPIR-TN  
    AU Clipsal cat number is 41EPIRM-TN

    The Iconic M PIR (Passive Infrared) Sensor Module is suitable for automatic switching (Power Saving) or security
    applications in domestic and commercial premises.
    The Sensor has a 100° horizontal and 82° vertical field of view with a 5-metre range. Switching capacity is 750W
    incandescent, 100W fluorescent, 150W LED and 100W motor ratings.
    The sensor controlled light is switched ON when infrared radiation from a moving target is detected and OFF again
    when movement stops and the pre-set time delay is reached. Time delay is adjusted between 10 seconds and 15
    minutes. The Sensor has a lux (light level) adjustment.
    The PIR is fitted with a red LED indicating that the device is sensing the target.

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance