Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Where is the communication settings of the ECC21 card saved for CM4000 meter?

    Issue:
    Customer is trying to swap ECC21 card on CM4000 meter and is asking if the communication settings (e.g. IP address) for ECC21 card are stored on the ECC21 card itself or on the CM4000 meter to know if it will require him to re-program the communication settings or not after the swap. Product Line:
    CM4000
    CM4250
    CM4000T

    Environment:
    Ethernet Communications

    Resolution:
    The communication settings are stored on the CM4000 meter, not on the ECC21 card. Swapping ECC21 card on CM4000 meter will not require to re-program the IP address and other settings for that meter.

    Note: The IP address is stored on the meter and there is a continuous interrogation between meter and ECC21 card to make sure that it has not been changed. If the address is changed from the web page it is pushed to the meter, if it is changed from the meter it is pushed to the card

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance