Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Can 755PSMA and 755SMA be interlinked with 755PSMA2?

    Yes 755PSMA and 755SMA can be interlinked / interconnected with 755PSMA2. Interconnecting smoke alarms is a method of joining a series of alarms so that if any one alarm senses smoke, all the connected alarms will operate (alarm).  A 9 V signal is applied to the interconnect wire (referenced to neutral) to alarm all the other interconnected alarms.
    • All interconnected smoke alarms must be supplied from the same circuit.
    • A common Neutral must be used for the Interconnect to operate.
    • DO NOT connect the Interconnect wire to Active or Neutral.
    • A maximum of 40 Clipsal 755 smoke alarms can be installed on one circuit (wired interconnection only).
    • Only Clipsal smoke alarms can be interconnected with each other.
    Failure to follow these instructions may result in injury and equipment damage / malfunction.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance