Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to install the latest ION Setup on top of existing ION Setup?

    Issue
    Customer is using an older version of the ION Setup and has lots of devices in it. He also likes to install the latest version of the ION Setup without losing all the devices he has in his current version.
    Product Line
    ION Setup 2.x, 3.0.1x
    Environment
    ION Setup software, Windows OS (Windows Vista, 7, 10, 8.1, Server 2012, 2008) 
    Cause
    Customer likes to use the latest features of the ION Setup without compromising his already saved work in the version he has.
    Resolution
    If the ION Setup version is 3.0.15xxx or later, the first place to check the latest version of ION Setup is Help>Check for Update…





    Clicking "Yes" will open the web site to download the latest ION Setup executable.
    Step 1
    Starting from version 3.0.15xxx, the ION Setup installer splits the installation files in 2 locations of the Windows Operating System: Program Files and Program Data. Prior to this version, all the installation files existed in the Program Files folder. One way to check the location of the Program Directory and Config Directory is to go to the Tools>Options>Directories location from inside the ION Setup.


    Depending on the version of ION Setup, please go to the Program Data or Program Files folder and copy all the .DAT files from under the ION Setup folder. Also, if there is any customization done in the Tables of a meter, please save the corresponding files in the Tables folder (inside the Program Files folder),
    Step 2
    Uninstall the currently installed ION Setup from Control Panel>Programs and Features
    Step 3
    Install the latest version, please run the ION Setup installer logged in as the local Administrator. Right-click the installer and select "Run as Administrator".
    Step 4
    Go to the Tools>Options>Directories location as before and note down the location of the Config directory. Close ION Setup, do not select "Yes" when it asks for saving the current configuration.
    Step 5
    Please go to the Config directory, as noted in the previous step, and paste the previously saved .DAT files in that location.
    Now open the ION Setup again. You should be able to see your previously saved work in the latest ION Setup.

    Note

    1. The latest ION Setup software, User Guide and Device Configuration Guide can be downloaded from the following web site

    http://www.schneider-electric.com/en/faqs/FA212816/

    2. If the OS is Windows 10, 8, 8.1, Windows Server 2008 R2, 2012 2012 R2, one needs to activate the Administrator account first and then start the installation process. Please consult with your IT department regarding the permission and OS-specific steps to enable/activate the local Administrator account.





     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance