Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to test the smoke alarm installed on a 755RFB base?

    The procedure to test the smoke alarms on a 755RFB base is as follows:
    • Test the LOCAL smoke alarm: Press and hold either the Remote Test button or the Local Test / Hush button and release within 4 seconds. Only the local smoke alarm will sound.
    • Test the LINKED smoke alarms: Press and hold either the Remote Test button or the Local Test / Hush button for more than 5 seconds. The linked alarms will sound.

    Note for wireless interconnection: After 5 seconds, a signal of 15 seconds duration is sent to all units. When the wireless linked smoke alarms detect the signal, they will sound until the signal is no longer transmitted. The wireless detection interval is 10 seconds.

    Important information: After theTest / Hush button has been pressed, wait 10 minutes before any additional testing is conducted to avoid any false alarm responses as product has reduced sensitivity during this period.

    For further information, please visit
    User-added image

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance