Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How do I reset a Process Drive to factory settings?

    Issue:
    How do I reset a Process Drive to factory settings?
     
    Product Line:
    ATV6xx, ATV9xx

    Environment:
    All models and serial numbers

    Resolution:
    1. From the main menu, scroll down to menu 7 [File Management], press OK
    2. Scroll down to menu 7.2 [Factory Settings], press OK
    3. Scroll down to [Parameter group list], press OK  
    4. Select from the following list depending on what parameters you want to reset.  Select "All" for factory reset of all parameters.
    - [All] ALL
        All parameters in all menus.
    - [Drive Configuration] drM
        Load [Complete settings] CSt- menu.
    - [Motor Param] MOt
        Load [Motor parameters] MPA- menu.
    - [Comm. Menu] COM
        Load [Communication] COM- menu.
        This parameter can be accessed if [Config. Source] FCSI is set to [Macro-Conf] ini.
    [Display Config.] dIS
        Load [Display screen type] MSC- menu.
        This parameter can be accessed if [Config. Source] FCSI is set to [Macro-Conf] ini.

    5. Press ESC to go back to the previous menu
    6. Highlight "Go to Factory Settings" and press OK.  You will get the following screen:

    *****************************************************************************************************************************
    WARNING

    UNANTICIPATED EQUIPMENT OPERATION
    Verify that restoring the factory settings is compatible with the type of wiring used.
    Failure to follow these instructions can result in death, serious injury, or equipment damage.
    ******************************************************************************************************************************
    If the above warning is observed then press OK to return the drive to factory settings.
     
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance