in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Is it possible to associate multiple alarms with a single DA Tag in the Event Notification Module Alarm Sentry Component?

    Issue:
    A user would like to associate multiple alarms with a single DA Tag in the Alarm Sentry component of the Event Notification Module.

    The Alarm Sentry Configuration appears to state that this is possible. The following is an excerpt from the Alarm Sentry Configuration Guide.

    "Transitions between states such as Hi to HiHi are effective immediately upon detection. To enforce delays for a specific level, create separate alarms for the same source DA tag and specify a limit for the desired level only. "

    Product Line:
    Event Notification Module (ENM) 8.x

    Environment:
    Alarm Sentry Configuration

    Resolution:
    1. It is not possible to associate multiple alarms with a single DA Tag in the Event Notification Module Alarm Sentry component
    2. It is only possible to associate a single alarm per DA tag in Alarm Sentry. In the case of an analog alarm, the alarm can be triggered on up to four states (HiHi, Hi, Lo, LoLo)
    3. The above-cited wording in the Alarm Sentry Configuration guide is not correct and will be updated

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance