Discover our Clipsal Smart Home packages as seen on the Block

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How configure the Display and Beeper on an InRow ACRD200 cooling system

    How configure the Display and Audible options on an ACRD200 cooling unit

    Product line:

    All Serial Numbers

    Install, Configuration


    Press ESC until you get to the main screen (On/Standby)
    Use the Up or Down arrows to find the heading Configure Display
    Press ENTER and select Contrast
    Now you will be prompted for a password
    Use the default password of “apc”
    If this does not work check with your Admin for the correct password
    If password has been lost use the last eight digits of the serial number
    Press Enter and set Contrast from 1-10. This changes the brightness of the screen.
    Press Enter on Key Click and turn On or Off. This allows every key on the display to make noise when used.
    Press Enter on Beeper Volume you can select Low, Medium, or High. This controls the level of the Beeper volume in turned on.
    Press Enter on Beep On Alarms and select ether On or Off. This enables the unit display to beep if unit is in alarm.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance