in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How to upgrade the Link 150 firmware?

    Issue:
    How to upgrade the Link 150 firmware?

    Product Line:
    Link 150 (EGX150)

    Environment:
    Firmware upgrade

    Resolution:


     
    1. Download the latest Link 150 firmware zip file attached below. 
      It can also be downloaded from this link
    2. Unzip the folder and store it in your local PC.
    3. Open the unzipped folder.
    4. Right-click the FirmwareUpgrade.bat, and then click Edit.
    5. Set the IP address, FTP user name, and password of the module being upgraded in the FirmwareUpgrade.bat file.
    6. Save and exit the FirmwareUpgrade.bat.
    7. Double-click the FirwareUpgrade.bat file, this starts the upgrade process. 
    8. Wait until the FirwareUpgrade.bat closes itself.
    9. After successful firmware upgrades, the Link 150 will take 40 seconds to restart. 
    Note:
    • Default IP address = 169.254.YY.ZZ where YY and ZZ are the last two bits of the Link 150 MAC address. 
    • Default FTP user name = Administrator
    • Default FTP password = Gateway

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance