Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What communications are available for the ATV600 series Process drives?

    Issue:
    What communications are available for the ATV600 series Process drives?

    Product line:
    Altivar process 600, 630, 650.

    Environment:
    all

    Cause:
    n/a

    Resolution:
    The ATV600 series drives comes standard with 3x RJ45 communication ports.  1 port is Ethernet/Modbus TCP, 2 ports are Modbus serial.
     - Ethernet port
              - Modbus TCP message handling is based on the Modbus protocol
              - SNMP (Simple Network Management Protocol)
              - The FDR (Fast Device Replacement) service allows automatic reconfiguration of a new device installed to replace an existing device
              - Device security is reinforced by disabling some unused services as well as managing a list of authorized devices
              - Setup and adjustment tools (SoMove, Unity with DTM) can be connected locally or remotely
              - The embedded Web server is used to display operating data and dashboards as well as to configure and diagnose system elements from any web browser

    These numerous services offered by the Ethernet port mean that Altivar Process drives can be integrated into Schneider Electric solutions.

    - Serial ports
              - One port dedicated to field network operation for exchanging data with other devices via the Modbus protocol
              - A second dedicated port for the multidrop connection of the following HMIs and configuration tools:
              - The remote graphic display terminal supplied with the drive
              - A Magelis industrial HMI terminal
              - A PC with SoMove or Unity setup software

    Optional communication modules
    The Altivar Process drive can also be connected to other industrial communication buses and networks by using one of the communication modules available as an
    option. Communication cards are supplied in “cassette” format for ease of mounting/removal.

    - EtherNet/IP and Modbus TCP Dual port, CANopen, PROFINET**, PROFIBUS DP V1**, DeviceNet and BACnet. 
    Please note that Lonworks is not available for the ATV600 series drives.  An external gateway will be required. 

    **PROFINET and PROFIBUS DP V1 modules also support the Profidrive and CiA402

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance