Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to Create a Disk Simulator Display

    Issue
    Simulating the behavior of a mechanical watt-hour meter.

    Product Line
    ION86xx meters

    Environment
    Display framework in an ION meter template

    Cause
    ION meter's Calibration Pulser modules support the Disk Simulator feature.

    Resolution
    1. Create a new Calibration Pulser module (CAL) and connect its input to a 'power' quantity (e.g. kVAR tot).
    Note that the energy value will be calculated and the result will be available on the output of the CAL module.  It is this energy value that will eventually be displayed.

    2. Set the 'Port' setup register to a physical port.  If the port is not specified, then the Disk Position output is zero even if there is a non‐zero accumulated quantity.

    3. Create a new Display module and choose the type as Disk Simulator.

              


    4. Connect the new Display module's first input to the Calibration Pulser module's Disk Position output that is to be monitored.

              
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance