Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What can cause a LCF fault on the ATV61 and ATV71 drives?

    What can cause a LCF fault on the ATV61 and ATV71 drives?

    Product Line:
    Altivar ATV61 and ATV71


    Monitoring time for closing of line contactor. If once this time has elapsed, there is no voltage on the drive
    power circuit, the drive will lock with an input contactor LCF fault.

    Check to make sure the Line contactor is closing when they give the drive a run command. 

    Programming Application function: Line contactor command
    Check your(LCT) Mains V Time out setting.  If there is a timing issue, try increasing this value.  The LCT Mains V Time out is factory set to 5 seconds. 


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance