Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How can I get the ATV312 drive to start when power is applied?

    Issue:
    Customer wants the drive to start the motor as soon as power is turned on to the drive,

    Product Line:
    ATV312, ATV31

    Environment:
    All Part numbers, all models

    Cause:

    Resolution:
    First go to the I-O menu and make sure tCC is set to 2C and that tCt is set to LEL.
    Then power down the drive and install a jumper between terminals +24 and LI1.
    When power is applied the drive will recognize the Run command is present and will run at the commanded frequency reference.

    If the drive will always run at the same speed, you can set the LSP parameter to the requrired frequency and not provide an analog input or other speed reference.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance