in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do you set up the damper control on the enclosed S-Flex ATV212 drive?

    Issue:
    How do you set up the damper control on the enclosed S-Flex ATV212 drive?

    Product Line:
    S-Flex ATV212 with bypass 

    Environment:
    All 

    Cause:
    Wants to wire in a damper control circuit to allow the damper to open before running the motor thru the drive. 

    Resolution:
    Step #1 Customer commands the drive to run by closing terminals (5-6) auto start. (Drive will not start at this time or until damper is opened)

    Step #2 Closing the auto start terminals  (5-6) will energize the RPR relay which will close user contacts (19-20) to start damper solenoid coil.

    Step #3 Damper solenoid will start to open damper.

    Step# 4 Once the damper is open the customer will need to provide a end of damper feedback limit switch. 

    Step #5 Remove the jumper from terminals (3-4) and wire your end of damper feedback dry NO contact to terminal (3-4).

    Please note that this damper function will only work in the remote control mode by closing contacts (5-6) and not the local mode run button on the face of the drive. 

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance