Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How can a BCM module be programmed for 2w modbus on a 4w communication system?

    Issue:
    Applying BCM programmed for 2 wire modbus to a 4 wire modbus system

    Product Line:
    Powerpact and Masterpact breakers with modbus communications

    Environment:
    Applies to trip units with BCM

    Resolution:
    1. With a newer Micrologic P or H trip unit you may re-program the BCM module to 4w.  This requires firmware version 2010AK or newer.
    2. If the trip unit does not have this option or if it is an A trip unit, you may use a 2w to 4w converter, CNV-100.  See the Attached Instruction Bulletin for more details.
    3. Schneider sales offices can also order a BCM programmed for 4w modbus.  Order the module number, 33106 in Q2C with a note that you want it programmed for "4w Modbus."  
      BCM 33106 profile is available only on Q2C Tool. Regional Field Offices to support order submission for customers who are unable to access Q2C.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance