Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Can BCPME be used as gateway to monitor downstream devices?

    Issue
    Can BCPME be used as gateway to monitor downstream devices? 

    Product Line
    BCPME

    Cause 
    BCPME has one ethernet port and it also has one RS-485 port. User would like to know if they can use RS-485 as master port and communicate with downstream devices. 

    Environment
    BCPME configuration as gateway

    Resolution 
    BCPME cannot be used as gateway. The RS-485 is designed as slave serial port and it can't be configured as master. As a result, user will not be able to monitor downstream devices from BCPME. 

    Note: The BCPME supports five protocols, some of which can operate simultaneously. The table below shows what protocols are supported in each mode.
     
    Protocol Mode  Primary Protocol Ethernet Protocol RS-485 Protocol 
    1 BACnet MS/TP Modbus TCP BACnet MS/TP
    2 BACnet IP BACnet IP/Modbus TCP Modbus RTU
    3 SNMP NMP/Modbus TCP  Modbus RTU
    4 Modbus  Modbus TCP  Modbus RTU

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance