in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Why does the drive not stop when the run command is removed?

    Issue: 
    Why does the drive not stop when the run command is removed?
     
    Product Line:
    Altivar 61, Altivar 71, Altivar 312, Altivar 212, Altivar12, Altivar 32
     
    Environment:
    All serial numbers
     
    Cause:
    The VFD is not responding to the stop command.
     
    Resolution:
    1).  Verify how the drive is receiving the stop command.
    2).  Verify if the drive is programmed to get the stop command from that source. 
    3).  Verify the drive is not in local control.
    4).   Check if the run signal is jumpered/bypassed

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance