Discover our Clipsal Smart Home packages as seen on the Block

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Why is my Conext CL inverter stuck on the Initializing Screen?

    1) The inverter is doing internal processing and may stay at the 'initializing' screen for up to 5 minutes after a firmware update. Note the current time and wait for five minutes

    2) If system stays in 'initalizing' for over five minutes. 
         - Download the latest firmware for the inverter from the SESOLAR.COM website. Unzip the firmware to a good-quality USB thumb drive.  
         - Remove DC and AC power from inverter and insert thumb drive
         - Apply DC or AC power to inverter, wait for inverter to boot, and accept prompt to upgrade firmware
         - Upgrade firmware as per  owner's manual 

    Contact your local Schneider Electric customer care team if problem persists

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance