Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Does the EGX150 (Link 150) support Powerlogic and SY/MAX protocols?

    Issue
    The user needs to know if the EGX150 supports the Powerlogic and SY/MAX protocols.

    Product Line
    EGX150

    Environment
    Gateway Protocol Support

    Cause
    A user needs to convert legacy device protocols such as Powerlogic and SY/MAX from CM2000 series, CM200 series, CM100 series, etc. to Modbus TCP/IP.

    Resolution
    The EGX150 supports the Powerlogic or SY/MAX protocols. When the 'Transmission Mode' within the serial port setting is automatic, the device allows you to communicate to Modbus RTU, Jbus, and PowerLogic™ (SY/MAX) slave devices on the same daisy chain.

    For Master mode, the usage of the COM port is:

    • Modbus RTU devices do not have to be defined in the Device List, but it helps you manage your system.
    • PowerLogic protocol (SY/MAX) devices must be defined in the Device List.

    EGX150 supported Protocols (Ethernet):
    IPv4/IPv6 - HTTP
    FTP
    Modbus TCP/IP
    SNMP (MIB II)

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance