Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What are pulse characteristics of the Extended Range Powerlogic Energy Meter?

    Issue
    Need the pulse characteristics of the Energy Meter (EME) to determine the compatibility of the input device.

    Product Line
    Powerlogic Energy Meter

    Environment
    Application requiring submetering device that produce and energy pulse (kWh) 

    Resolution
    *Warning:  Installation and maintenance of this device should only be performed by qualified, competent personnel that have appropriate training and experience with high voltage and current devices. Failure to follow the instructions / warnings in the Meter Installation Guide can result in permanent damage to the meter, severe injury or death.


    The pulse output is a contact closure only - power must be supplied externally in the range of 5-24 V ac/dc, with a maximum load of 100mA.

    The pulse output provides a contact closure for 200ms at each pulse time. Be sure the controller will accept this signal as an input. See marked location of the pulse out terminal in figure below.




     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance