in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to disassemble an XB4 Operator

    Issue:
    How do you disassemble an XB4 operator and mounting collar

    Product Line:
    XB4 line of products, Harmony 22mm

    Environment:
    US Products

    Resolution:
    See attached file for representation.
    To disassemble an XB4 operator you need to pull the button/selector switch out of the mounting collar by using a small flat screw driver to pull down on the metal "L" shaped part on the bottom of the mounting body. You can then remove the contacts using the flat screwdriver to lift on the metal hooks that hold the contact block to the back of the mounting collar.

    To assemble you snap the head into the mounting body by lining up the arrow on the collar with with arrow on the head. You can add contact blocks by pushing the bottom latch of the contact into the collar, and then you push the contact to the collar so that the metal hooks latch on to the back of the collar.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance