in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Start, Stop and Restart a ClearSCADA driver from System Command

    A ClearSCADA driver can be stopped, started or restarted by calling a system command of the following format:

    ScxCMD -s MainServer:5481 -u "UserName" -p "UserPass" STOP DriverName

    where:

    • MainServer is the IP Address or Name of the Main server. 
    • UserName and UserPass are the user name and user password respectively.
    • DriverName refers to the driver being stopped, started or restarted. Replace "STOP" by "START" or "RESTART" to start or restart the driver.

    Below is an example of stopping the Crystal Reports driver:

    ScxCMD -s 192.168.159.200:5481 -u "User1" -p "Password1" STOP CrystalReports
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance