in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    I have a special firmware for running the drive over 599hz, but why can I not run above 600hz?

    Issue:
    I have a special firmware for running the drive over 599hz, but why can I not run above 600hz?

    Product Line:
    Altivar 61 and 71

    Environment:
    All products of the Altivar 61 and 71 series

    Cause:
    Has the special software for running the drive over 599hz, but cannot get it to run above 600 hz.

    Resolution:
    The usual max is around 600 hz. To run above 600hz you will need to adjust some settings in the drive.
    In Menu 1.4 Motor Control, you will need to set your Rated Motor Frequency (FrS) to 1000hz, set the Max Frequency (tFr) to 1000hz and then set the High Speed (HSP) to 1000 hz.

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance