in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do you program the FL fault relay on the ATV21 or ATV212 drives?

    Issue:
    How do you program the FL fault relay on the ATV21 or ATV212 drives?

    Product Line:
    Altivar ATV21, ATV212 and S-flex enclosed

    Environment:
    All

    Cause:
    Wants to program the FL relay so that it monitors fault status and opens when the drive faults.

    Resolution:
    Programming push the mod button until you see AUF arrow down to F------- enter
    Find F132 enter and set this to 11
    11= no drive fault

    Wiring FL relay example
    FLC to FLA is NO contact
    FLC to FLB is NC contact

    Please note the relay will change states when the drive is powered up and there are no faults and open when it sees a fault.
    Example: FLA to FLC is normally open  it closes when the  drive is powered up and there are no faults but opens again when the drive faults.
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance