Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What happens to PWR terminal when using External 24V power supply?

    Issue:
    Customer is using external 24V supply for the ATV61 or ATV71 drive.  Trying to determine if they need external 24V on the PWR safety terminal.

    Product line:
    ATV61, ATV71, Altivar 61, Altivar 71

    Environment:
    All model, all serial numbers

    Cause:
    External power being used.

    Resolution:
    The PWR terminal needs to have 24VDC on it, to prevent the Power Removal drive state.  The drives are supplied standard with a factory jumper from 24V to PWR.  If the customer is using external 24VDC, they can choose to include this with the external 24V by removing the factory jumper and applying 24VDC.  If they do not wish to use this safety circuit, they can leave the factory jumper in place.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance