Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What adjustments can be made to the ATS48 soft starter if max starting torque is needed?

    What adjustments can be made to the ATS48 soft starter if the motor is stuck and max starting torque is needed?

    Product Line:
    Altistart ATS48 soft starter


    Motor is stuck, or conveyor or grain elevator is loaded down. Need to increase starting torque to get the load moving

    If the motor is stuck, or if more torque is needed to help move the load on start up, try adjusting the following parameters:

    DRC menu make sure your Torque control CLP is set to Yes.
    SET menu set the t90 or Initial starting torque from 20% to 100% depending on what amount of torque is needed to start.
    ILT= current limit try increasing 400% to 700%
    tHP= Motor thermal protection set to class 20.

    Once the motor breaks loose you can set all of the above parameters back to the original settings.
    These settings can be left this way if desired, depending on customer's preference. However, be aware that maximum torque is being applied to your machines, and equipment damage may incur in situations where maximum torque isn't needed. 

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance