Discover our Clipsal Smart Home packages as seen on the Block

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Can a Wiser 1 project be used on a Wiser 2?

    Not recommended, but it is possible. The following steps will describe how to achieve this:

    1) Convert the project type to Wiser 2 from the Project Details menu. (Hit Back twice when in Project Details)

    2) Once converted, hit Next until you return to the Project Details section again.

    3) Under the tabs Wiser -> Properties set the C-Bus Connection to Direct Connection.

    3) Under the tabs Wiser -> Skin, set the drop down box to Default.

    NOTE: Confirm that all widgets are how you require them, and then transfer the project to the Wiser 2.

    Ideally, Schneider Electric recommends always creating a new project to help prevent any possible issues.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance