Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What would cause the ATV61 or ATV71 drive not to stop when you remove the start command?

    Issue:
    What would cause the ATV61 or ATV71 drive not to stop when you remove the start command?

    Product Line:
    Altivar ATV61 and ATV71

    Environment:
    All

    Cause:
    They remove the run command and drive takes a long time to stop well beyond the dec time.

    Resolution: 
    1st Check to see if the drive is going into the auto dec ramp adapt mode.  If so try turning off the auto dec ramp adapt and if the drive goes into OBF you will need to add an DB resistor.
    2nd Check to see what the dec time is programmed for.  If its low try increasing the the Dec time.
    3rd  Check the UFR IR comp parameter in the Set menu try reducing this parameter

     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance