Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Why do some parameters reset on my ATV212 (or S-Flex) drive when I cycle power?

    Issue:
    Why do some parameters reset on my ATV212 drive when I cycle power?
     
    Product line:
    ATV212 series drives
     
    Environment:
    ATV212 series drives equipped with Lonworks card VW3A21212
     
    Cause:
    Information unavailable in current literature.
     
    Resolution:
    6 parameters are stored in the Lonworks card.   At each power cycle, the Lonworks card will overwrite these six registers in the drive, with the values stored in the Lonworks card, even if the Lonworks network is not being used.  If the card is installed in the drive, these parameter will be overwritten.   In order to set the parameters, you must write them to the Lonworks card.
     
    nciMaxSpeed          Maximum Motor Speed            (UL)
    nciMinSpeed           Minimum Motor Speed              (LL)
    NCINmlSpeed          Nominal Motor Speed in RPM   (F417)
    NciNmlFreq             Nominal Motor Frequency        (uL)
    NciRampUpTm        Minimum Ramp Up Time            (ACC)
    NciRampDownTm  Minimum Ramp Down Time        (DEC)








     
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance