Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    ETSNZ How to Set Up Pulse Outputs on PM800 Meters

    At the meter:
    Firstly enter "Maint" on the PM810 meter  then go to "set up" and  hit the "+"  button which will bring up the password = "0000" - enter on this if this default password has not been altered.

    You can then arrow across  to "I/O"  and enter - then "D Out" which gets you to the set up for the KY Pulse output contacts.

    Press  "EDIT"  and then "+" until you see "Pulse"   and the appropriate parameter you require  - for example "PULSE" - " kWHr/P"  - "Total"

    Press "OK" when you get the correct parameter and then you can set the pulse weight  to 1.00 kWHr per pulse

    Then all you need do is arrow out to the main screen and the meter will ask if you wish to save the changes.


    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance