Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Unable to find Com'X IP address using Wireshark

    Issue
    Packets captured via Wireshark do not contain the Com'X IP address

    Product Line
    Com'X 200, Com'X 510

    Environment
    Wireshark, Com'X gateways

    Cause
    The Com'X does not transmit its IP address using ARP protocol upon power cycle like the EGX 100/300 gateways.

    Resolution
    If you are using Windows 7 or Windows Vista, the device should appear as a Network Device.
    • Disconnect your computer from all networks (all wired and/or wireless networks)
    • Connect an Ethernet cable between your PC (configured as  DHCP client) and the Ethernet 2 port on the Com'X
    • Open Windows Explorer and click on Network, the Com'X appears in the list of devices
    • Double-click the Com'X, the login page automatically opens in your browser
    • Type the user name (admin by default) and password (admin by default)
    • Then click OK
    •  The IP can be found under Settings > General Settings > Network Settings 


    Note: If accessing the meter for the first time, the factory set IP for both Ethernet ports is 10.25.1.1.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance