Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What would cause the ATV66 drive to just shut down with no fault?

    Troubleshooting ATV66 drive unexpected shut down with no fault.

    Product Line:
    Altivar ATV66, ATV56, 66U and 56U


    The drive is stopping and shutting down without showing any faults on the display.

    1st check the drives status in the bottom right hand side of the HMI.  What is the status? RDY, NRP,
    If the drives status is RDY then we need to check the drives run signal on LI2 for 2 wire control.
    If the drives status is NRP then we need to check the run permissives input on LI1.
    You can monitor the status of the logic inputs in menu 2.1.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance