Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    M241/M251 Firmware update using Somachine Controller Assistant with SD Card

    Looking for the procedure to update the firmware of M241/M251 using an SD card.

    Product Line:

    Controller Assistant

    Below are the instructions for M241/M251 Firmware Update using SoMachine Controller Assistant:
    Use a SD Card that has been Formatted Fat32
    From SoMachine Central > Select Maintenance
    Select Controller Assistant
    Select Update Firmware..
    Controller Type M241/M251
    Select the Latest Firmware and the correct Controller
    Select Next
    Select Next
    Select Write to..
    Select Write
    After it completes the Write.
    Select Close
    Eject the SD Card.
    Power off the M251
    Insert the SD card.
    Power on M251
    SD light should be flashing.
    After about 3 minutes
    SD Light should be on Solid.
    Power off M251 and remove SD card.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance