in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to add a Lantronix UDS1100 Ethernet Gateway Site in PME

    Title
    How to add a Lantronix UDS1100 Ethernet Gateway Site in PME

    Issue
    Unable to communicate to a Lantronix UDS1100 using the default Lantronix MSS 3001 port.

    Product Line
    ION Enterprise, SPM, PME, Lantronix

    Environment
    ION Enterprise, SPM, PME

    Cause
    Different model numbers of the Lantronix devices use different ports for communication.
    The Lantronix MSS devices use port 3001 for channel 1 and 3002 for channel 2.
    Lantronix UDS, CoBox, XPress, and XPort use 10001 for channel 1 and 10002 for channel 2.

    Resolution
    When adding the Ethernet Gateway Site for the Lantronix UDS1100:
    1.) Add the site in Management Conslole
    a.) Select Sites
    b.) Right click on the right field and select New/Ethernet Gateway Site
    c.) Enter the IP address for the gateway
    d.) For TCP/IP Port type 10001 (ignore the fact that this may not be available in the dropdown and just type the numbers)


    2.) Login to the Lantronix Web page of the UDS1100 by entering the IP addess on the web brower, it will ask for a username/password, you can ignore it and just click on login
    3.) Configure the Protocol, local Port and Port Settings to match downstream serial device. Example is given below.



    4.) Return to Management Console> Sites
    5.) Right click you site created above and select Connect
    6.) Click Stay Connected

    The site should connect to the lantronix and then show Connected in Management Console

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance