Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Video: How do you remove the bottom cover on the ATV61 and ATV71?

    How do you remove the bottom cover on the ATV61 and ATV71 drives so you can access the line input and motor output terminals connections?

    Product Line:
    Altivar ATV61 and ATV71 LHP units only or under 90KW


    They can not get the the bottom cover off to check the power terminals.

    1st Turn off all power make sure the drive is not powered up and the DC bus is discharged before starting.
    You will need to turn the set screw counter clockwise on the control terminal pod.  Next use a flat head screw drive to pry the corners on each side the cover to see if you can work it loose.  Then pull  down cover to remove it.

    This procedure is demonstrated in the video below:

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance