Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How does the PowerSCADA Expert alarm priority correspond with Event Notification Module severity?

    Each alarm in PowerSCADA Expert has an alarm category. The alarm categories each have an associated priority. An user would like to know how this priority corresponds to the severity field they see in Event Notification Module so that they can setup alarm filters appropriately. 

    Product Line
    Powerlogic Scada 7.20
    PowerSCADA Expert 7.30/7.40
    PowerSCADA Expert 8.0/8.1/8.2

    Event Notification Module Configuration

    The correspondence between the PowerSCADA Expert alarm priorities and Event Nonfiction Module depends on the versions in use.

    PLS 7.2 / PSE 7.30 / PSE 7.40
    The following formula is used to determine ENM severities based on the above PSE versions:
    ENM Severity = 1000 - PSE Priority + 1

    Example: For PSE priority 2, the ENM severity to set in this screen is: (1000 - 2 +1) =999
    For PSE priority 0, ENM assigns a severity of 1. 

    PSE 8.0 / PSE 8.1 / PSE 8.2
    The PSE priority and ENM severity have been changed to a one-to-one structure. (ENM 8.3 and above)

    See the below relations:
    PSE Priority 1 (HIGH) = ENM Severity 1
    PSE Priority 2 (MEDIUM) = ENM Severity 2
    PSE Priority 3 (LOW) = ENM Severity 3
    PSE Priority 0 (EVENT) = ENM Severity 0

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance