Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    Can you send a command to a C-Bus Coupler to switch a contact like an Alarm AUX, or Roller Door motor?

    No, the C-Bus Coupler is not able to output to or control a connection to it, the Bus Coupler will only recognize a contact closure and then send a command onto the C-Bus to perform an action.

    These are typically used for a status of a contact being either open or closed, or when a C-Bus switch is not suitable in the environment. For example you might need a IP rated switch in a cool room, this mechanical switch will connect to the inputs of the Bus Coupler which in turn when switched will send a command onto C-Bus.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance