in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Powerhouse Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What can cause an CFF fault on the ATV12 drives?

    Issue:
    What can cause an CFF fault  on the ATV12 drives?

    Product Line:
    Altivar ATV12

    Environment:
    All

    Cause:
    Drive is powering up with an CFF fault and will not clear.

    Resolution:
    CFF= incorrect configuration fault.

    Possible causes:
    -HMI block replaced by and HMI block configuration on a drive with a different HP ratings.
    -The current parameter of the customers parameter is inconsistent.

    Remedy:  Try resetting the drive back to a factory default by going into the
    ConF  menu enter
    FCS menu enter
    change FCS menu to InI and hold for 2 seconds.
    Now power cycle the drive.
    If the fault clears now try and reprogram the drive.  If you are still getting the CFF fault you will need to replace the drive.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance