Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What can cause an OCL short circuit fault on the ATV21 or ATV212 drives?

    What can cause an OCL short circuit fault on the ATV21 or ATV212 drives?

    Product Line:
    Altivar ATV21 and ATV212 including the S-Flex enclosed drives.


    The ATV212 drive is tripping on OCL fault when they try and run the motor.

    OCL means phase to phase output short circuit.  The motor impedance to ground is low.
    Troubleshooting tips:
    Try dropping the motor leads and meggering out the motor with a 1kv meggerII if the motor checks out ok

    If you need to run the drive open circuit without the motor connected:
    Turn off the Drive and wait until the DC bus caps have discharged.
    Turn off OPL ( F605) , set to 0  then set up F307 to 2
    Now with the motor disconnected  you can run the VFD open circuit at 20  40 and 60hz.  Check your output voltage at each stage.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance