Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do I link my Twido Suite symbols to my Vijeo Designer Project?

    To link the Twido Suite PLC symbols to your Vijeo Designer Project, use the following procedure below:

    1) In Vijeo Designer, add a Modbus RTU or Modbus TCP/IP driver to the I/O Manager (enable IEC syntax if necessary)
    2) Go to the variable menu.
    3) Select Link Variables
    4) Change the file filter to .xpr
    5) Browse to the Twido Suite project file with the extension .xpr
    6) Press Open
    7) In the Dialog box that appears, select the variables you wish to link and select "ADD".

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance