Discover our Clipsal Smart Home packages as seen on The Block 2018

in location


I'm looking for

  • Wholesalers
    • Uncheck All Check All
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How to find the IP address of ION7550 RTU with no display in a range of IP address

    How to determine the IP address of ION 7550 RTU with no display within a given range of IP addresses

    ION 7550 RTU with no display



    Use nmap to scan an IP address range and return the mac address found. ION7550 RTU meters will have a MAC address that starts with 00:60:78

    1) download nmap from
    2) In command propmt navigate to the folder where is located (eg. cd "c:\Downloaded\nmap")
    3) run the command nmap -p 23,80,502,7700 [Ip address range] (eg.  nmap -p 23,80,502,7700
    4) Examin the results and determine IP address of device(s) with Mac Address 00:60:78. Below is an example of the results
    Nmap scan report for
    Host is up (0.00s latency).
    23/tcp   open  telnet
    80/tcp   open  http
    502/tcp  open  mbap
    7700/tcp open  unknown
    MAC Address: 00:60:78:64:32:14 (Power Measurement)
    5) Connect to the web page with the specific IP address found in Step 4 to verify the serial number or owner/tag information

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance