Discover our Clipsal Smart Home packages as seen on the Block

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    How do you set the IP Address of a M340 BMXNOE?

    To set the IP Address to a M340 BMXNOE01x0 module, a new network needs to be setup. In the Unity project browser, expand the Communication folder then right click on Networks and select New Network…

     
    Set up an Ethernet network and name it. The default name is Ethernet_1. Click OK. You will see Ethernet_1 under your Networks folder. Double-click the Ethernet_1 network and the configuration screen will appear.
    Within the Ethernet network configuration the appropriate Model Family needs to be selected. The default Ethernet model family is set to a NOE. Leave the default selection. If you hover over the different model family options with your mouse you will see what each option covers as far as CPU's and NOE's.


    Once the correct model family has been selected, the new network has to be linked to the BMXNOE. To link the network, select the BMXNOE Ethernet port from the Project Browser. The BMXNOE Ethernet Configuration screen will come up. On that screen you will link the network previously setup, as seen below.


    Rev Date 7/18/2017
     

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance