Discover our Clipsal Smart Home packages as seen on The Block 2018

in location

OR

I'm looking for

  • Wholesalers
    • Uncheck All Check All
  • EXPERTISE
    • Expand
    • Expand
    • Expand
    • Uncheck All Check All
  • Switchboard Manufacturers
    • Uncheck All Check All
OR

The best way to see what Clipsal electric products can do for your home is seeing them in action at a Clipsal Display Centre.

Product stock may vary according to location. If you're after a specific product range, please check with your chosen location before visiting.

10 Results
    Load More Load Complete
    Change Location

    What is the default IP address on the M251 controllers?

    The default IP addresses are:
    • 11.11.x.x. for Ethernet 1
    • 10.10.x.x. for Ethernet 2 (only available on TM251MESE)
    NOTE: The 2 IP addresses must not be in the same IP network.
    The last 2 fields in the default IP address are composed of the decimal equivalent of the last 2 hexadecimal bytes of the MAC address of the port.
    The MAC address of the port can be retrieved on the label placed on the front side of the controller.
    The default subnet mask is Default Class A Subnet Mask of 255.0.0.0.

    NOTE: A MAC address is always written in hexadecimal format and an IP address in decimal format. Convert the MAC address to decimal format.
    Example: If the MAC address is 00.80.F4.01.80.F2, the default IP address is 10.10.128.242.

    NOTE: To take into account the new IP address after the download of a project, reboot the controller by doing a power cycle.

    Didn’t find what you were looking for?

    Try Searching Again View Our Categories

    Need further assistance?

    Our Customer Care department provides total customer service solutions for our residential, industrial and commercial applications.

    Get Assistance